For TenneT we are looking for an experienced: Inspector Structural / Welding / Coating / Mechanical for LPO.
About TenneT, the Unit, Department and Team
TenneT is a leading European Transmission System Operator and plays a key role in the energy transition. With more than 23,500 km of high-voltage connections and nearly 5,000 employees, we ensure a safe and reliable electricity supply in the Netherlands and large parts of Germany.
You will be working within one of TenneT’s project organizations responsible for the realization of large-scale infrastructure offshore projects, the 2GW Program. Within this environment, you will collaborate closely with package leads, quality coordinators, engineering disciplines and external (sub-) contractors, suppliers to ensure compliance with quality requirements throughout the manufacturing phase.
The activities within this role contribute directly to the modernization, expansion and sustainability of the Dutch high-voltage grid.
Introduction
At TenneT, we are working on the electricity grid of tomorrow. As an Inspector (Structural / Welding / Coating / Mechanical), you play a crucial role in ensuring the quality of vendor-manufactured equipment and components that support a future-proof energy system. Through your expertise, you directly contribute to projects that keep the Netherlands powered today and in the future.
Large Projects Offshore (LPO):
Based on the Energy agreement, where the targets and intentions for the transition to a more renewable energy supply are set, the Roadmap Offshore wind energy 2030 and the ambition to realise additional windcapacity prior to 2030 a roll-out strategy is being prepared for the medium term, including the IJmuiden Ver (DC) projects. This results in a commitment for TenneT to realise at least 2x (with potential up to 5) 2GW HVDC Grid Connection Systems which bring the power from offshore wind-farms in the North sea to the Dutch electricity grid to be commissioned between 2028 - 2030.
The 2GW program:
Europe's energy transition is among the greatest challenges of our time. Its goal: To make Europe the first climate-neutral continent by 2050 at the latest. The Netherlands and Germany have therefore set themselves ambitious goals to expand offshore wind energy: as early as 2030, Germany and the Netherlands want to reach a capacity of 30 and 22.2 Gigawatts, respectively. Energy from offshore wind farms in the European powerhouse North Sea will play in this a crucial role. TenneT guarantees that this energy will reach the mainland - and in the most environmentally friendly way possible. That is why we have developed the 2GW program with a unique transnational approach. And thus increase the pace and efficiency of the energy transition. Link to the 2GW program: https://url.de.m.mimecastprotect.com/s/aVRdCDqXvYiBvVqQQCWfG6sjvQEp?domain=tennet.eu
Tasks and responsibilities:
Your responsibilities include:
• Supporting Package Leads (SPL) and the QC Coordinator in reviewing quality deliverables such as as-built documentation, punch lists and other vendor documentation against Employer’s Requirements.
• Supporting structural, welding, coating and mechanical disciplines with quality-related issues and documentation.
• Monitoring the execution of Inspection and Test Plans (ITPs) as specified in Inspection Notifications during the vendor manufacturing phase.
• Performing welding, coating, mechanical inspections and Factory Acceptance Tests (FATs) on behalf of TenneT based on a risk-based inspection schedule.
• Facilitating and supporting remote inspections through video connections and digital inspection tools.
• Reporting and monitoring quality-related issues, including NCRs and open points.
• Monitoring the implementation of Employer’s Requirements related to welding, coating, piping and materials.
• Aligning closely with the TenneT QC Coordinator regarding inspections, ITPs and quality issues.
• Travelling frequently to vendor construction and manufacturing locations across Europe.
• You will work closely with project teams, package leads, quality coordinators, contractors and vendors to ensure the required quality standards are achieved.
Profile:
• HBO or WO degree in engineering: mechanical, structural, marine, etc. is preferred.
• +- 10 years of experience as inspector in Offshore Oil & Gas, Renewables, or Shipping industries.
• Strong expertise in reviewing, drafting, and implementing Quality Control Plans (QCPs) and Inspection and Test Plans (ITPs) in line with project requirements.
• In-depth understanding of key industry standards and codes such as API, ASME, ASTM, ISO, AWS, DNV en EN, ensuring high-quality compliance in inspections.
• Certified Welding Inspector (CSWIP 3.2 or equivalent) and/or Certified Coating Inspector (NACE CIP Level 2 or equivalent) preferred, with expertise in welding and coating inspections.
• Proven experience in inspecting a variety of mechanical equipment (e.g., pumps, cranes, HVAC, generator sets), with additional NDT qualifications being a plus.
• Strong ability to identify QC issues, assess supplier recovery plans, and communicate effectively with stakeholders
• Willingness to travel frequently across Europe (40-60% of the time) to vendor sites, with possible weekend travel, while maintaining the ability to work both independently and as part of a team.
• Valid driver’s license in the Netherlands/Europe, essential for travel to vendor locations.
• High proficiency in English , Dutch is not mandatory.
Softskills:
• Team player
• Great communicator
• Open minded and flexible
• Ambitious and driven
• Involved and motivated
Good to know:
• The role requires frequent international travel (2-3 times per month), mainly in Europe, to vendor and contractors sites, with possible weekend travel, while maintaining the ability to work both independently and as part of a team.
• Team: international, diverse, with a flat hierarchy.
• Experience with 3/4 disciplines (Structural / Welding / Coating / Mechanical ) is required.
• The rate depends on the expertise and skills of the candidate.
* For TenneT, we no longer work with the self-employed indirect construction, but this can still be indicated when offering. This construction automatically becomes a fee-only construction where the supplier has to surrender € 1.45 per hour of the margin. The supplier will automatically be removed from the chain after 1 year. So keep this in mind.
Additional information:
• Suppliers must be aware of the laws and regulations regarding employment conditions and Tennet’s Collective Labour Agreement. This assignment is placed in scale 8.
• We would like to receive the personal motivation of the candidate and CV in English.
• This is an external position with full-time availability.
Screening:
• Pre-employment screening: If the candidate is selected to start, a pre-employment screening will be executed. We will send you the required documents to be filled in and returned as soon as possible. Your candidate is only allowed to start after the pre-employment screening has been completed successfully. The VOG Application is part of the screening. The VOG must be received before the candidate could start;
• All submitted candidates must be in possession of a valid Passport or ID card, which must be taken along to the interview and at the start of the assignment.
Availability:
• Important, the candidate has to be available throughout the entire duration of the assignment;
• By submitting a candidate, you are agreeing to the terms of this specific client. If you are not familiar with these terms, you can ask our recruiters for a copy.
IMPORTANT: Fill all the information about the candidate in correctly. When asked for the address, fill in the address of the candidate. This is information the client needs to receive with the submission. Incomplete/incorrect submissions risk being rejected.